Fuxingda Equipment
Address：No. 1188, Lanzhou West Road, Jiaozhou, Qingdao, China
Mobile：+8613969602091
phone：+86532-82291997
phone：+86532-82291997
Before igniting the cupola, the blower and cooling water pump must be started first to ensure that the blower and cooling water pump work normally, and the pressure of natural gas must be confirmed to meet the requirements. The cooling water flow, pressure, temperature, air volum...
The molten iron ladle is mainly used for pouring in the casting workshop. After receiving the molten iron in front of the furnace, it is transported to the casting mold by the crane for pouring Features of molten iron ladle: 1. The rotation center is reasonabl...
1. Check the overall condition of the molten iron ladle, the shell of the molten iron ladle, and the structure of each part at the bottom of the ladle are complete, without cracks, deformation, open welding and other damage2. Check the erosion of molten ir...
Online shopping is now the trend. For example, please consider buying a toaster. If you don't know anything about this type of product, you'd better confirm the relevant information online and understand the details. When you choose to buy a baker like this, you have a certain...
Precautions for charging cupola:Scrap steel shall not be added to the first two batches of charge, and 10~20% high-quality scrap steel can be added to the next batch as required. Once the charging into the furnace is started, the charging action must be continuous, fast and ...
The molten iron ladle is widely used in the casting industry; After receiving molten iron in front of the furnace, it is transported to the mold by crane for pouring. The molten iron ladle is mainly composed of 6 partsI. The hanger assemblyis compos...
Bag roasterAlso known as the roaster, it is a baking equipment used for molten steel ladle, molten iron ladle, aluminum ladle, spheroidizing ladle and other devices in the casting industry. Ac...
Today, cupola and other industrial furnaces have become the key targets for the treatment of air pollution. The tail gas produced by cupola must be treated by dust removal equipment before being discharged. Next, we will analyze the difficulties in dedusting the cupola1. The...
(1) Place the prepared core bone (iron pipe wrapped with straw rope) on the carriage frame, and then put the car pole so that the distance from the working edge of the carriage to the surface of the iron pipe is equal to half of the difference between the diameter of the sand cor...
In order to improve the monitoring sensitivity when installing the ladle toaster, the controller cable should be careful to prevent mixing with other power plugs or power cables. The following common problems must be mastered:1. If the camera is far away fro...
111 