Fuxingda Equipment
Address：No. 1188, Lanzhou West Road, Jiaozhou, Qingdao, China
Mobile：+8613969602091
phone：+86532-82291997
phone：+86532-82291997
1. Determination of ash cleaning method of electric furnace dust removerCommon ash cleaning methods of electric furnace dust remover include back blowing, vibration and pulse. The anti-blowing and vibration ash cleaning method has low energy consumption, but the general f...
The cold test of the baler is an important step in the formal start-up stage of the unit. Before the cold test, the cold test process of the baler must be mastered and checked1. Check whether the valve can be opened and closed normally and whether the valve positio...
Most domestic iron and steel enterprises generally use open ladle to hold molten iron. The ladle is placed on the ladle car and transported from the blast furnace to the steelmaking operation area by diesel locomotive or car. At present, the blast furnace in domestic iron and ...
Electric furnace dust remover is the equipment that separates dust from flue gas. Electric furnace dust remover is a common supporting equipment in boiler and industrial production. Its function is to clean up the particulate smoke and dust in the flue gas from boiler fuel and co...
The molten iron ladle is mainly composed of 6 components: hanger, stable installation, can body, slowing down organization, electric part, gathering and dispersing part① hanger assemblyThe hanger assembly is composed of three parts: hanger, beam and hanger (hook)...
The development of electric furnace dust remover has been very stable in recent years, which is also due to the gradual reduction of the use of boilers and the increasing number of manufacturers using electric furnaces. The design of the installation system of electric furnace...
In order to prolong the service life of the molten iron ladle, the safe operation and maintenance regulations should be familiar with:1. Remove the full obstruction of the channel and place where the molten iron ladle is stored 2. Check whether the...
The electric furnace charging car may be unfamiliar to our readers, because it is often used in the refining furnace of the casting plant or steel plant, and the electric furnace charging car is often installed in the furnace. The shell is at the rear, so it can be used to add th...
111 